Labelmate RRC330-U-ST
Label Counter & Inspection Unit
CLEAR LABEL VERSION
Part No: LMC003
£1595.00
FREE Mainland UK Delivery

Code: LMC003
£1,595.00

OR
Free Delivery*
on All Orders Over £100+VAT
*Except: Scottish Highlands and Islands, Isles of Man, Wight and Scilly, NI, Channel Islands and Eire. Orders under £100.00+VAT £6.95.

Features
This is the 'U' version of the standard RRC300-ST label counter and inspection unit. The 'U' version has an ultrasonic sensor (in addition to the standard label gap sensor) that is used to count clear labels (where there is no register line printed on the backing paper) and also very dark labels.

You can switch between using the standard gap sensor and the ultrasonic sensor by selecting a switch position on the back of the unit.

Reel-to-Reel Counting System is a self-contained table-top unit that incorporates a pre-set counter. The RRC-330-U-STANDARD accepts roll with a maximum size of 330mm. The unwind shaft and the take-up shaft are fitted with a “quick-change shaft” that allows to quickly change the core holder diameter (38, 40, 44, 50, 70, 76 and 100mm available).

To operate the machine simply load the labels and input how many labels you need to count on the display unit keyboard. After you have turned the operation switch to run the labels will feed through the unit at a speed determined by the speed control adjuster knob and will automatically stop when the desired amount of labels has been reached.

Download Labelmate RRC330-U-ST PDF Here!

- Handles labels up to 152mm wide
- Roll capacity up to 330mm
- Available for 38, 40, 44, 70, 76 and 100mm cores
- Speed up to 235cm/sec